Beautiful, wood furnishings add splendor to a room and never lose their charm, but due to the various bumps and scratches they are subjected to over the years, they may start to look worn out eventually. Refinishing these pieces can effectively bring back their past glory, making them look almost like new. Whether looking to refinish one's own furnishings, or hiring a professional to do so, when thinking about refinishing wood furniture Dallas clients will find it useful to know what's involved in it.
Before a piece can get refinished, it is necessary to remove all of the finish that is already on it. A furniture stripping product in either a liquid, gel, paste, or semi-paste form is used for this purpose, when working with upright surfaces, it's best to use a thicker formula so it won't run. Since these are strong chemicals, one must wear mask, goggles, and gloves when working with them. The stripping compound is applied to the piece and left to stand for the time indicated, scraped away with a putty knife, rinsed, and left to air dry.
If the furnishings have deep gouges or scratches, these will need to be filled in using wood filler. This product is a type of putty which is pressed into any surface divots using a craft knife. Once level, it will need to dry completely so it can then be sanded along with the rest of the piece.
Several sandings will normally be needed, beginning with the coarser 120 grit sandpaper, and continuing to use increasingly fine sand paper, with 220 grit being used for the final sanding. In between each sanding, furnishings will need to be wiped down with a cloth to remove dust before the next one. Sanding blocks can be used for flat surfaces, but a folded piece of sandpaper will be needed to reach small, detailed areas.
Next, the surface of the furniture must be primed, this will help the stain go on more evenly. One may use either primer or sand sealer for this step, painting it all over the piece and leaving it to dry fully before adding the finish.
There are many different colors of stains to choose from, although it's necessary to select one that will work well with the natural color of the wood in order to produce an attractive hue. Some stains are brushed on while others are applied with a soft cloth, either way the excess must be blotted up using a cloth. The same amount should be applied to each section of the item being stained.
Once the furniture has been stained, it's time to apply a varnish, this provides both a lovely shine and some degree of protection as well. There are spray-on varnishes such as wax and polyurethane, both of which add gloss but the latter has more resistance to damage from moisture. Oil-based, brush-on types such as shellac and lacquer can also be used, but one must pay more attention to preventing drip marks.
Not everyone wants to attempt to refinish their own furnishings, which is why it's good that there are professionals who offer this service. These refinishing pros know how to make a worn, old piece look radiant once again, can recommend the best stain and varnish, and have it ready in just a few days time.
Before a piece can get refinished, it is necessary to remove all of the finish that is already on it. A furniture stripping product in either a liquid, gel, paste, or semi-paste form is used for this purpose, when working with upright surfaces, it's best to use a thicker formula so it won't run. Since these are strong chemicals, one must wear mask, goggles, and gloves when working with them. The stripping compound is applied to the piece and left to stand for the time indicated, scraped away with a putty knife, rinsed, and left to air dry.
If the furnishings have deep gouges or scratches, these will need to be filled in using wood filler. This product is a type of putty which is pressed into any surface divots using a craft knife. Once level, it will need to dry completely so it can then be sanded along with the rest of the piece.
Several sandings will normally be needed, beginning with the coarser 120 grit sandpaper, and continuing to use increasingly fine sand paper, with 220 grit being used for the final sanding. In between each sanding, furnishings will need to be wiped down with a cloth to remove dust before the next one. Sanding blocks can be used for flat surfaces, but a folded piece of sandpaper will be needed to reach small, detailed areas.
Next, the surface of the furniture must be primed, this will help the stain go on more evenly. One may use either primer or sand sealer for this step, painting it all over the piece and leaving it to dry fully before adding the finish.
There are many different colors of stains to choose from, although it's necessary to select one that will work well with the natural color of the wood in order to produce an attractive hue. Some stains are brushed on while others are applied with a soft cloth, either way the excess must be blotted up using a cloth. The same amount should be applied to each section of the item being stained.
Once the furniture has been stained, it's time to apply a varnish, this provides both a lovely shine and some degree of protection as well. There are spray-on varnishes such as wax and polyurethane, both of which add gloss but the latter has more resistance to damage from moisture. Oil-based, brush-on types such as shellac and lacquer can also be used, but one must pay more attention to preventing drip marks.
Not everyone wants to attempt to refinish their own furnishings, which is why it's good that there are professionals who offer this service. These refinishing pros know how to make a worn, old piece look radiant once again, can recommend the best stain and varnish, and have it ready in just a few days time.
About the Author:
You can visit www.leatherandwood.com for more helpful information about When Considering Refinishing Wood Furniture Dallas Clients Should Know What It Involves.
No comments:
Post a Comment